Home   Help Search Login Register  

 
May 23, 2013, 09:44:38 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
Pages: [1]
  Print  
Author Topic: Car Scales Needed  (Read 468 times)
0 Members and 1 Guest are viewing this topic.
XtremeBoomer2007
Driver
**
Offline Offline

Posts: 17



View Profile
« on: April 20, 2012, 02:37:46 PM »

Hello,
    Got the coil overs on but need to corner balance and get an alignment; I cant find anyone with scales; anyone got them or know where to go....in Newport, NH will travel. 
Logged
solo-x
Legend
***
Offline Offline

Posts: 319


View Profile
« Reply #1 on: April 20, 2012, 03:52:50 PM »

Hello,
    Got the coil overs on but need to corner balance and get an alignment; I cant find anyone with scales; anyone got them or know where to go....in Newport, NH will travel. 

Flat Out Motorsports, Small Fortune Racing, or APEX are the ones I know of. Not sure of any closer to NH, but I would hit up the local circle track shops as they'll have scales too.
Logged
XtremeBoomer2007
Driver
**
Offline Offline

Posts: 17



View Profile
« Reply #2 on: April 20, 2012, 07:43:43 PM »

thanks, I wish I knew this area better I was hoping I wouldn't have to drive down to lower Mass but I'm not sure there is much up this way.  I emailed the local speedway hopefully they know something.
Logged
davidh729
Driver
**
Online Online

Posts: 181


View Profile
« Reply #3 on: April 20, 2012, 08:18:16 PM »

You can try Ric Racing www.ricracing.com as well. Last I talked to Rick Hiland he wasn't doing as much racing stuff, but its worth calling him. He's in Bow NH.
Logged
blang
Legend
***
Offline Offline

Posts: 608



View Profile
« Reply #4 on: April 21, 2012, 05:20:30 AM »

if you're at NHMS SAT, find me and we can talk.

40 FP TR6.

I'm just north of Boston.
Logged
bills
Driver
**
Offline Offline

Posts: 17


View Profile
« Reply #5 on: April 23, 2012, 12:50:35 PM »

DWW motorsports has all the setup stuff. they are across the street from devens
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines
AF316 theme by Fedhog
Valid XHTML 1.0! Valid CSS!